Yard Jockey Job at Estes Express Lines, Greensboro, NC

cDc0TWx5L205S0xDSUZvQXdhQ29mcHNyS2c9PQ==
  • Estes Express Lines
  • Greensboro, NC

Job Description

Job Summary
  • Safely handle and maneuver tractor/trailers and other large equipment to facilitate the loading and unloading operations in the yard
  • Perform pre-shift and post-shift inspections of the yard and dock equipment
  • Properly cube, load and unload freight using a forklift, pallet jack, hand truck or by hand
  • Properly load freight to prevent damage and shifting in transit by blocking and bracing and thru the use of load bars, straps, dunnage and air bags.
  • Accurately set up, break down and hook trailers safely
  • Ensure all pup trailers have tilt bar to be lowered prior to loading of freight
  • Raise and lower landing gear
  • Monitor yard for unsafe drivers and non-employees; notify management
  • Work in outdoor weather conditions
  • Perform all duties of dockworker as requested
  • Communicate effectively with Dock supervision, Line Haul drivers and Fleet Services personnel
  • Regular attendance is required.
  • This is not an all-inclusive list of job requirements and/or duties and may not contain all mental and physical capabilities necessary to perform the job at all times due to circumstances. Operational, safety and other needs may require the employee to perform any and all other duties as assigned. Employees are expected, and must be able to perform all such duties and tasks.

Qualifications

  • High School Diploma or General Educational Degree (GED), or any combination of education and experience, which would provide an equivalent background
  • Must be 17+ years of age
  • A valid CDL and acceptable MVR are required if driving on public roads
  • If a CDL holder, must be registered with the FMCSA Drug and Alcohol Clearinghouse
  • Experience in the transportation industry a plus although not required
  • Stable work history
  • Ability to operate forklift (7500 lb. vehicle)
  • Must be able to push or pull loaded pallet jack and/or hand truck with a minimum load of 70lbs
  • Physical abilities include: standing, lifting, twisting, turning, climbing a ladder, etc.
  • Must be capable of dropping/hooking and coupling trailers which involves cranking landing gear, pulling 5th wheel pin which takes approximately 65 lbs. of pressure; and maneuvering a trailer dolly
  • Night/weekend shifts may be required
  • Must be able to lift approximately 70 lbs., or more if required by the essential functions of the job
  • Must be able to comply with all company policies, rules, procedures and Code of Conduct
  • Must be able to interact well with others
  • Must be able to work independently, or in a team setting
  • Must be capable of working under tight time constraints in a high volume environment with multiple priorities
  • Responds well to questions; Ability to read, interpret and comply with written information and documents such as safety rules, operations / procedure manuals and maintenance instructions with a high comprehension and concentration level to include the ability to meet deadlines
  • Must pass a pre-employment drug screen, random drug and/or alcohol tests, and will be subject to a criminal history background check
  • Must be authorized to work in the United States

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to lift and/or move a minimum of 70 lbs. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle or feel and reach with hands and arms. The employee is frequently required to lift, twist, turn, and may climb. The employee is frequently required to stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to sit and climb or balance.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and fumes or airborne particles. The employee may be required to work in high/precarious places, with hazardous materials, and in various weather conditions. The noise level in the work environment ranges from quiet to loud as required by the essential functions of the job.

Job Tags

Shift work, Night shift, Weekend work

Similar Jobs

Confidential

Womenswear Designers - Wovens Job at Confidential

 ...Hard sticks and needles, urine, thyroid testing Processing Detail oriented and good experience Computer skills Data Entry and processing Minimum 1.5 years of experience Summary: The main function of a phlebotomist is to assist in performing various... 

Gregory Packaging Inc.

CDL Truck Driver Job at Gregory Packaging Inc.

 ...CDL Truck Driver $70-80k CDL-A Driver Regional Driver AZ, NV, NM, So Cal Weekly average 40-50 hours Schedule: Monday - Friday...  ...for the past (3) three years. Knowledge of HACCP and food safety is a plus. Pass DOT physical examination as required by... 

Confidential

Primary School Music Teacher Job at Confidential

 ...equivalent Key Responsibilities Plan and deliver engaging Music lessons to primary students Incorporate singing, instruments,...  ...related field Native English speaker preferred Prior experience teaching Primary Music in an international or bilingual school setting... 

CPP- Minneapolis

Pattern Maker (Aerospace casting) Job at CPP- Minneapolis

As a Pattern Maker , you will create and maintain pattern tooling and fixtures for our foundry. Who are we?Were a 100+ year aerospace industry leader trusted by commercial, regional, corporate, and military aircraft manufacturers around the world. We produce precision... 

Transco Northwest Inc.

Hydraulic Mechanic Job at Transco Northwest Inc.

 ...equipment which is tailor-made to meet our customers specifications. About the Role: We are looking for an experienced Hydraulic Mechanic to join our maintenance and operations team. The successful candidate will be responsible for inspecting, troubleshooting,...